Search for:

Customer Help Portal

< All Topics
Print

Insta 201 Heat Press Screw Issue

Issue:

One of our customer having issue on his Insta 201 Heat Press. In the place of make adjustment pressure the rotator screws went down nearly 1-3 CM down

Solution:

This issue can happen if the key has been worn off. Please review part number MP201-043-2B (HAND WHEEL, KEY) and check for wear. If this part is not worn off, the nut at the bottom can be adjusted to bring the threaded shaft back to the required position. If wear is observed on the key then the problem will keep on repeating, so it will be good to order the key. 

Table of Contents